DUOTIGHT 8MM (5/16) IN-LINE REGULATOR - INTEGRATED GAUGE FOR WATER/GAS

This awesome compact solution for adjusting water and gas pressure can be useful in many different applications. This can be used for compressed air, CO2, nitrogen, mains water supply and many other things.

The unit is made from food grade engineering plastic, stainless steel and quality made EPDM seals.

The design utilizes the reliability of the DuoTight o-ring system to make sure you can fit hoses to this unit quickly and with leak free connections.

NOTE: 0-60psi Gauge as standard.  These small gauges enable the regulator to be so compact however for more accurate pressure readings we recommend getting the digital upgrade gauge option.

These gauges are accurate to about 10% of the range of the pressure gauge. So if you use the lowest range possible it will ensure the best possible accuracy.

If you would like to set up a 4 way or 6 way manifold using inline regulators then use one of the custom polypropylene boards to set them up:

Plastic Gas Board for 6 x Inline regulators

Plastic Gas Board for 4 x Inline regulators

IMPORTANT WARNING: Do not exceed gauge pressure. If you set a gauge pressure higher than the graduations on the gauge you can damage the gauge. (ie if you are using the 0-60psi gauge. Do not set pressure above 60psi or damage to the gauge may occur.)